How is water treated?
After collecting water from a natural waterbody, the raw water undergoes sedimentation. During sedimentation, some particles spontaneously settle down. For particles slow to settle, chemicals (coagulants) are added to the water. This leads to the formation of larger particles that settle rapidly.
As fine suspended particles hold bacteria and viruses to their surface, these processes can remove up to 99 per cent of the bacteria and viruses. In the next step, filtration removes even smaller particles when the water passes through a bed of fine particles, generally sand. Membrane filtration is also used where water is filtered through tiny holes (pores) in a membrane rather than a bed of sand.
Then the water is disinfected using chlorine and stored and supplied through a public distribution system.
Related Content
- Order of the National Green Tribunal regarding sewage entering the rivers Senki, Pachin and Dikrong in Arunachal Pradesh, 08/04/2025
- Report by the Central Pollution Control Board (CPCB) on discharge of treated effluent from the 50 MLD common effluent treatment plant (CETP) into Buddha Nallah by the Punjab Dyers Association, 19/03/2025
- Affidavit filed by the Bihar State Pollution Control Board regarding quality of Ganga water in the state, 17/03/2025
- Report by the Central Ground Water Authority (CGWA) regarding use of groundwater by cricket stadiums, 17/03/2025
- Report by National Mission for Clean Ganga (NMCG) on the steps taken to arrest the deteriorating water quality of river Ganga in Bihar, 17/03/2025
- Order of the National Green Tribunal regarding discharge of untreated / partially treated sewage in river Ganga and its tributaries, Uttar Pradesh, 04/03/2025